What is the volumetric flow rate, and how does it work?

ProteusInd
Join to follow...
Follow/Unfollow Writer: ProteusInd
By following, you’ll receive notifications when this author publishes new articles.
Don't wait! Sign up to follow this writer.
WriterShelf is a privacy-oriented writing platform. Unleash the power of your voice. It's free!
Sign up. Join WriterShelf now! Already a member. Login to WriterShelf.
4.55K   0  
·
2020/12/04
·
3 mins read


If you want to know more about the volumetric flow rate, then read this post below. In this post, we will discuss the volume flow rate.

What is volumetric is a volume flow rate? 

Volumetric flow is the number of liquid passes through the selected point at the length of time. Volume flow rate is measured in the SI unit of the meter cubic per second. However, you will get them written as liters per second, which is (I /S) or I /h. 

The volume flow rate is defined as a volume that passes through the given cross-section area of a given unit time. 

When it comes, the volume flow rate is listed as Vdot or with a dot on the letter's top. An example is here: ‘V

The following are flow rate measurements you can use:

The mass flow rate (kg/s)

Velocity flow rate (m/s)

The formula of the volume flow rate

Q=V/t - This is the formula of the volume flow rate

The liquid inside the pipe is written as V=Ad 

A represents the cross-section of the fluid

d showcase the width of the fluid portion

when the pipe has the cylinder, you need to substitute V's formula into the volume for you to get its volume. 

Q=t/V​=t/Ad​=At/d

d/t is the length of the volume fluid that divides time through the length of the speed fluid. 

The formula for it is Q=Av.

How is the volume flow rate measured?

It is measured in two ways. Let us check them below: 

Let the fluid flow into the measurement tank over the length of the time. 

Calculate from velocity or mass flow rate as listed above.

Method 1:

It does not require practice but is easy. It would help if you allowed the fluid to flow into the flask and divide the measurement volume by the length of time. Let see its formula now: 

(m3)* (s) = m3/s

Method2: 

This is done mostly in the industry because fluid is not disturbed in the process. It shows the real-time data analyses for the processing of the services. ‘

To determine the volume of the flow rate, you need to calculate the average of the velocity and cross-section area. Its volume is calculated with the multiplication of these two together. The additional equipment is needed to measure velocity. 

To get the cross-section volume of the pipe is: 

CSA=(n x Diameter ) ÷ 4

To solve the speed of the volume, you need to know this formula. 

Q=Av

V1 represents the cross-section of the pipe. 

Effects of the volume flow rate 

Note the volume flow rate changes with the temperature and pressure of the area. Volume changes in case of a change in the pipe or duct construction. If there is an increase in the velocity, there is an increase in the volume flow rate. 

Conclusion 

If you were reading this post, then I believe you can understand how volumetric flow rate works. There is more to be done with the formula. These posts can help you to know the volume of fluid in the pipe.  


WriterShelf™ is a unique multiple pen name blogging and forum platform. Protect relationships and your privacy. Take your writing in new directions. ** Join WriterShelf**
WriterShelf™ is an open writing platform. The views, information and opinions in this article are those of the author.


Article info

Tags:
Date:
Published: 2020/12/04 - Updated: 2020/12/11
Total: 513 words


Share this article:



Join the discussion now!
Don't wait! Sign up to join the discussion.
WriterShelf is a privacy-oriented writing platform. Unleash the power of your voice. It's free!
Sign up. Join WriterShelf now! Already a member. Login to WriterShelf.